V Belt Spur Conveyor

The 138CLRSS straight spur v belt Conveyor (Model 138CLRSS) can be stand alone powered or slaved to another section. It’s used for merging or diverging cartons.

Specs and Features

Driving Belt - "B" section V-belt.
Bed - Roller bed width between frames, 10" 13", 16", and 22".  5-1/2" x 1-1/2" x 12 gauge powder painted formed steel channel frame.
Tread Rollers - 1-3/8" diameter x 18 gauge galvanized steel tread rollers, 1-1/2" centers, 5/16" hex shaft for 13" to 19" OAW.  2-1/2" to 1-11/16" tapered roller for 25" OAW conveyor, 7/16" hex shaft.
Pressure Sheaves - 3" diameter x 3/8" bore, adjustable to give required driving force.
Floor Supports - One support adjustable 30" to 44" from floor to top of rollers. Center leg on outer rail of "138CLRS".
Tangent - 12" long, on one end of curved spur.
Take-Up - Screw take-up provided to insure proper V-belt tension.  Mounted in conveyor frame.
End Drive - Mounted below bed section.
Bearings - Sealed pre-lubricated with cast iron housings.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 1/2 HP 230/460-3-60 TE motor.
Conveying Speed - 60 FPM constant.
Capacity - 300 lbs. total distributed live load.