V Belt Curve Conveyor

v belt curve conveyor

The 190 CLR V-belt Curve Conveyor (Model SL) can be stand alone powered or slaved to another section. This conveyor is used to accumulate light boxes, totes or cartons.

Specs and Features

Driving Belt - "B" section V-belt.
Bed - Roller bed width between frames, 15", 21", 27", 33" and 39".  2-1⁄2" diameter tapered to 1-11⁄16" diameter x 14 gauge wall plated tread rollers.  7⁄16" hex shafts.  Steel pressure sheaves.  Mounted in 7" x 1-1⁄2" x 12 gauge powder painted formed steel channel frame.
Floor Supports - Adjustable 31-1⁄2" to 45-1⁄2" from floor to top of rollers.
One support at each end, and center leg on outer rail.
Take-Up - Screw take-up provided to insure proper V-belt tension.  Mounted underneath conveyor.
Tangent - 12" long, one on each end.
End Drive - Mounted below bed section.
Bearings - Sealed pre-lubricated with cast iron housings.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 1⁄2 HP 230/460-3-60 TE motor.
Belt Speed - 60 FPM constant.
Capacity - 540 Ibs. total distributed live load.