Trough Slider Bed Conveyor

Trough Slider Bed Belt Conveyor conveys boxes, bags, cases, loose parts. The built in guard rails allow use as overhead conveyor.

Specs and Features

Belt - 8", 12", 18", 20", 24" and 30" Black PVC 120 belt.
Bed - 12 gauge powder painted formed steel with 2-1⁄2" high vertical sides bolted to top of bed. Standard sections are 5 and 10 feet long bolted together with floor supports and splice plates.
Tail Pulley - 4" diameter crowned with 1-3⁄16" diameter shaft.
Drive Pulley - 4" diameter and 8" diameter crowned and fully lagged. 4" diameter pulley with 1-3⁄16" diameter shaft, 8" diameter pulley with 1-7⁄16" diameter shaft.
Snub-Roller - 2" diameter for 4" diameter pulley, 2-1⁄2" diameter for 8" diameter pulley.
Return Idler - 1.9" diameter adjustable, on 10'0" centers.
Floor Supports - Adjustable 28-1⁄2" to 42-1⁄2" from floor to top of belt. One support supplied at each end of conveyor and at each bed joint.
Take-Up - 6" long screws located at tail pulley to provide belt tension.
Bearings - Sealed-pre-lubricated with cast iron housings.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 1⁄2 HP 230/460-3-60 TE motor.
Belt Speed - 60 FPM constant. ( other speeds available)
Capacity - Maximum load per lineal foot of conveyor - 75 pounds. Not to exceed Load Capacity Chart.