Trash Conveyor

Trash Conveyor has adjustable floor supports and can incline to 15 degrees.

Specs and Features

Bed - 5-1/2" deep x 14 gauge powder painted formed steel channel frame.  Bed sections are 10 feet and 5 feet long, bolted together with splice plates and floor supports.
Belt - 12", 18", 24", 30", 36", 42" and 48" wide, black PVC 90, FS top side, brushed bottom side with clipper lacing.
Guard Rail - 6" high x 16 gauge formed, powder painted steel on both sides, full length of bed sections.
Underside Guards - Formed 16 gauge pans full length of bed sections, removable, secured with TEK screws.
Tail Pulley - 4" or 6" diameter (see chart) crowned with 1-3/16" diameter shaft.
Drive Pulley - 4", 6" and 8" diameter crowned and fully lagged.  4" and 6" diameter pulleys have 1-3/16" diameter shaft, 8" diameter pulley has 1-7/16" diameter shaft.
Snub-Roller - 2" diameter for 4" and 6"diameter pulleys, 2-1/2" diameter for 8" diameter pulley.
Return Rollers - 1.9" diameter placed on 10' centers.
Floor Supports - Adjustable 30" to 44" from floor to top of belt.  One floor support provided at each end of conveyor and at each bed joint.
Take-Up - 6" long screws located at tail pulley to provide belt tension.
Bearings - Sealed, pre-lubricated with cast iron housings.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 1/2 HP 230/460-3-60 TE motor.
Capacity - 10 pounds per foot maximum live load.  See Load Capacity Chart.