Slider Bed Conveyor

Medium Duty Slider Bed Conveyor is used for packing, inspecting, sorting, assembly, testing and transportation.

Specs and Features

Belt -  8", 12", 18", 20", 24" and 30" Black PVC 120 Belt.
Bed - 12 gauge powder painted formed steel, 4" deep.  Bed sections are 5 feet and 10 feet long, bolted together with spice plates and floor supports.
Tail Pulley - 4" diameter crowned with 1-3/16" diameter shaft.
Drive Pulley - 4" diameter and 8" diameter crowned and fully lagged.  4" diameter pulley with 1-3/16" diameter shaft, 8" diameter pulley with 1-7/16" diameter shaft.
Snub Roller - 2" diameter (for 4" diameter drive pulley), 2-1/2" diameter (for 8" diameter drive pulley).

Return Roller - 1.9" diameter adjustable on 10'0" centers.
Floor Supports - Adjustable 28-1/2" to 42-1/2" from floor to top of belt.  One support supplied at each end of conveyor and at each bed joint.
Take-Up - 6" long screws located at tail pulley to provide belt tension.
Bearings - Sealed and pre-lubricated with cast iron housings.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 1/2 HP 230/460-3-60 TE motor.
Belt Speed - 60 FPM constant. Other speeds available.
Capacity - Maximum load per lineal foot of conveyor - 75 lbs.  Not to exceed Load Capacity Chart