Roller Bed Conveyor - Belt Over Roller

Roller Bed (Belt over Roller) Conveyor is used for packing, inspecting, sorting, assembling, testing and as transportation conveyor.

Specs and Features

Belt - 12", 18", 24", 30", 36", 42" and 48" Black PVC 120 belt.
Bed - Roller bed with 1.9" diameter galvanized steel rollers. Rollers spaced on 6" centers. Rollers mounted in 7" deep x 12 gauge powder painted formed steel channel frames. Frames bolted together with butt couplings and floor supports.
X-Bracing - Frame squaring device supplied on conveyors 40 feet and longer for every other bed section. X-bracing insures good product and belt tracking.
Drive Pulley - 8" diameter crowned and fully lagged, 1-7/16" shaft.
Tail Pulley - 4" diameter crowned supplied through 30" wide belts.  6" diameter crowned supplied for 36" and wider belts. 4" diameter pulley has 1-3/16" diameter shaft; 6" diameter pulley has 1-7/16" diameter shaft turned down on ends to 1-3/16" diameter.
Pop-Out Roller - 1.9" diameter roller Located at drive pulley and tail pulley.
Snub Roller - 2-1/2" diameter adjustable roller, Located directly behind drive pulley, 2" diameter located behind tail pulley.
Return Rollers - 1.9" diameter adjustable on 10'0" centers.
Take-Up - Located at tail end, provides 12" of belt take-up.
Bearings - Sealed-pre-lubricated with cast iron housings.
Floor Supports - Adjustable 31-1/2" to 45-1/2" from floor to top of belt. One support supplied at each end of conveyor and at each bed joint.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 1/2 HP 230/460-3-60 TE motor.
Belt Speed - 60 FPM constant. (Other speeds available)
Capacity - 200 pounds per foot maximum. Not to exceed Load Capacity Chart.