Drag Chain Pallet Conveyor

Drag Chain Pallet Conveyor (Model DCE) is used for conveying heavy pallets with photoeye controlled zero pressure accumulation.

Driving Belt - 8" wide for 15" and 21" between frames, 12" wide for 27" between frames, 16" wide for 33" and 39" between frames; black PVC 120 belt.

Bed - Roller bed width between frames, 15", 21", 27", 33", and 39". 7" x 1-1/2" x 12 gauge powder painted formed steel channel frame, bolted together with butt couplings and floor supports.

Tread Rollers - 1.9" diameter x 16 gauge galvanized steel rollers spaced on 2-1/4", 3", 4-1/2", or 6" centers. Safety pop-out design prevents damage to product or harm to personnel if caught between belt and tread rollers.

Pressure Rollers- 1.9" diameter x 16 gauge galvanized steel rollers spaced on 6", 9", or 12" centers, cam adjusted.

X-Bracing - Frame Squaring device supplied on conveyors 40 feet and longer on every other bed section. X-bracing insures good product and belt tracking.

Tail Pulley - 4" diameter crowned with 1-3/16" shaft.

Drive Pulley - 8" diameter crowned and fully lagged with 1-7/16" diameter shaft.

Snub Roller - 2-1/2" diameter adjustable, located directly behind drive pulley. 2" diameter at each end directly behind terminal pulleys

Return Idlers - 1.9" diameter adjustable on 10'0" centers.

Floor Supports - 31-1/2" to 45-1/2" adjustable from floor to top of rollers. One support supplied at each end of conveyor and at each bed joint.

Take-Up - Located in center drive, provides 24" of belt take-up.

Bearings - Sealed and pre-lubricated with cast iron housings.

Speed Reducer - C-Face mounted heavy duty worm gear reducer.

Motor - 1/2 HP 230/460-3-60 TE motor.

Belt Speed - 60 FPM constant.

Capacity - 150 pounds per foot

Videos and Product Data Sheets

Please fill out this simple form to view all CASI product sheets and videos. You will have access to all CASI downloads. The information provided will only be used to help us determine the best solution for your environment and meet your budget!