CDLR Slip Sheet Conveyor

Chain Driven Live Roller Conveyor (Model 251 CRR) is used for conveying heavy pallets or drums.

Specs and Features

Bed - Conveying surface width 28", 34", 40", 46", 52", 58", and 64". 2-1⁄2" diameter x 11 gauge and 2-5⁄8" x 7 gauge steel tread rollers, 11⁄16" hex shafts.  No. 50 chain is used on 5", 7-1⁄2", 10" roller centers only.  No. 60 chain is used on 6", 7-1⁄2", and 12" centers only.  Tread rollers mounted in 4" and 6" x 4 gauge powder painted formed steel channel frame.  Sections are bolted together with butt couplings and floor supports.
Drive Chain - No. 50 roller chain or No. 60 roller chain can be used with either the 251CRR or 267CRR as above.
Floor Supports - Heavy duty supports are adjustable 30-1⁄4" to 40" from floor to top of roller.  One support at every bed joint and each end of conveyor.
Center Drive - Mounted underneath conveyor, center of section.  Can be placed most any where in conveyor length.
Bearings - Sealed, prelubricated ball bearings.
Chain Guard - Lower chain guard is mounted on bottom of roller frame, and upper chain guard is mounted above roller frame to totally enclose drive chain.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 3⁄4 HP 230/460-3-60 TE motor.
Speed - 30 FPM.
Capacity - Maximum load per linear foot of conveyor; 300 Ibs. with supports on 10' centers, 1000 Ibs. with supports on 5'0" centers.