CDLR Pallet Conveyor for Pallet Accumulation

Chain Driven Live Roller Conveyor (Model 251 ACDE) is used for accumulating pallets on the conveyor. Air operated with heavy duty construction, this CDLR is photoeye controlled with zone connections outside the frame for easy installation

Specs and Features

Frame - Heavy duty 7" deep x 4 gauge powder painted formed steel channel with heavy duty cross braces.  Frames are bolted together with splice plates and floor supports.
Rollers - 2-1/4" diameter x 11 gauge steel rollers, grease packed and labyrinth sealed bearings, 11/16" hex shaft.  Rollers are spaced on 4" or 6"centers, set 2-1/4" low.
Floor Supports - Adjustable 18-3/4" to 23-3/8" (HD-4) from floor to top of roller, for each end of conveyor and at each bed joint along with knee braces for each support.  Supports on 5 foot centers, changes with zone length.
Drive - Located near center of conveyor length, shaft mount motor and reducer.
Drive Chain - RC #40 chain used for roller to roller connections, RC #60 chain drives each zone.  Chains are totally enclosed by metal guards.
Accumulation Zones - Standard zone lengths are 60" long with a maximum of 30 zones per single drive.  Each
zone is driven by an air clutch and controlled by a sensor roller.
Motor - 3/4 HP 230/460-3-60 TE motor.
Electrical Controls - Input to a power supply.
Conveyor Speed - 30 FPM constant roller speed.
Capacity - 4000 pounds maximum unit load.  Total conveyor live load not to exceed Load Capacity Chart (see catalog page).
Speed Reducer - Heavy duty, sealed worm gear, C-Face.
Bearings - Sealed pre-lubricated with cast iron housings.
(For Optional Equipment, Weight Specifications, and Engineering Line Drawings, please see catalog pages, above).